103g to 133g Across Seven Options
Start with the weight range that matches how heavy a steel shaft you currently play — from the lightest Tour 105 up through the heaviest Wedge 125.
Nippon N.S. Pro Modus3 Tour105 Steel Iron Shaft (.355" Tapered Tip)
Nippon N.S. Pro Modus3 Tour120 Steel Iron Shaft (.355" Tapered Tip)
Nippon N.S. Pro Modus3 Wedge Shaft
Nippon N.S. Pro Modus3 Tour130 Steel Iron Shaft (.355" Tapered Tip)
Nippon N.S. Pro Modus3 Tour115 Steel Iron Shaft (.355" Tapered Tip)
Nippon N.S. Pro Modus3 Tour125 Steel Iron Shaft (.355" Tapered Tip)
Bundles Set of 7x Nippon N.S. Pro Modus3 Tour120 Steel Shaft
Nippon N.S. Pro Modus3 Tour105 Steel Shaft (.370" Parallel Tip)
Bundles Set of 7x Nippon N.S. Pro Modus3 Tour105 Steel Shaft
Nippon N.S. Pro Modus3 Tour120 Steel Shaft (.370" Parallel Tip)
Nippon N.S. Pro Modus3 Tour130 Steel Iron Shaft (.370" Parallel Tip)
Nippon N.S. Pro Modus3 Tour110 Steel Iron Shaft (.355" Tapered Tip)
Nippon N.S. Pro Modus3 Tour120 Luxury Black Iron Shaft (.355" Tapered Tip)
Nippon N.S. Pro Modus3 Tour105 Luxury Black Iron Shaft (.355" Tapered Tip)
Nippon N.S. Pro Modus3 Wedge Luxury Black Shaft
Bundles Set of 7x Nippon N.S. Pro Modus3 Tour130 Steel Shaft
(Assembled) Nippon N.S. Pro Modus3 Hybrid Shaft with Adapter Tip + Grip
Nippon N.S. Pro Modus3 Hybrid Shaft (0.370" Tip)
N.S. Pro Modus3 Tour is Nippon's steel iron-shaft family built around a shared idea — a stepless, seamless steel tube — with each weight tuned to a different tip and mid-section stiffness and torque, rather than just a heavier or lighter version of the same shaft. Two Modus3 shafts at the same flex letter can still feel and launch differently, because the bend profile changes model to model, not just the total weight.
As an authorized Nippon dealer, we carry the full Tour lineup — 105, 110, 115, 120, 125 and 130 — plus the Modus3 Wedge shaft, in Chrome finish standard, with Black Matte and Luxury Black available as color options on select weights. Weight, torque and bend-profile figures below are pulled directly from Nippon's own product pages.
Every figure below is Nippon's own published spec; R and X/TX flexes run lighter and heavier than the S-flex figures shown. Confirm the exact number for your flex on each product page.
Start with the weight range that matches how heavy a steel shaft you currently play — from the lightest Tour 105 up through the heaviest Wedge 125.
Tip and mid-section stiffness differ by model — Tour 120 runs a stiffer tip with a softer mid for control, Tour 130 runs the opposite for a higher trajectory.
Chrome is the standard finish. Black Matte and Luxury Black are color options available on select weights — same shaft, different color.
Tour 105 is the lightest weight in the family, with a traditional bend profile — a starting point for golfers moving down in weight from a heavier tour-weight shaft.
Tour 120's stiffer tip and softer mid section deliver a lower-spin, control-oriented trajectory — Nippon's most-played Modus3 weight on tour.
Tour 130's softer tip and stiffer mid section raise trajectory without giving up a full tour-weight shaft.
Compare every Nippon steel family — 950GH, Zelos and the full Modus3 Tour lineup — side by side before you choose.
Read the Nippon Shaft GuideEach weight has its own tip and mid-section stiffness and torque, not just a different total weight. Tour 105 is the lightest, with a traditional bend profile. Tour 110 is the newest model, with rigidity built up from tip through mid-section and a tip-shifted balance point for a heavier-shaft feel. Tour 115 has a straightforward profile tuned to match modern lighter driver-shaft weights. Tour 120 uses a stiffer tip with a softer mid-section for a lower-spin, control-oriented feel — Nippon's most-played Modus3 weight on tour. Tour 125 keeps the traditional balanced profile at full tour weight. Tour 130 uses a softer tip with a stiffer mid-section for a higher trajectory at tour-level spin. Exact weight, torque and flex options are on each product's spec sheet.
Start with the weight range that matches how heavy a steel shaft you currently play, then let the bend profile decide between two neighboring weights — pick 120 over 105 if you want more control and lower spin at a similar swing feel, or 130 over 125 if you want more launch without dropping weight. Our shaft buying guide covers flex and weight basics if you're starting from scratch.
If you're already playing a tour-weight steel shaft (120g+) and want to stay at a similar weight, Tour 120, 125 or 130 are the closest matches — the difference between them is bend profile, not weight. If you're coming from a lighter steel or graphite shaft, Tour 105 or 110 keep you closer to that weight while still giving you the Modus3 feel. The 950GH vs Modus3 Tour 105 comparison is a useful reference point if you're coming from an even lighter shaft.
950GH and Zelos are Nippon's lighter steel families (roughly 68–105g depending on model), aimed at golfers wanting a lighter steel shaft than traditional tour weight. Modus3 sits heavier across its range (roughly 103–130g) and is built around six tuned weight steps rather than one core profile. See the full breakdown in the Nippon shaft guide.
Yes. The Modus3 Wedge shaft is available in three weights (105, 115 and 125g) so you can match your wedge shaft weight to whichever Tour iron weight you're playing.
Chrome is the standard finish across the Modus3 Tour range. Black Matte and Luxury Black are color options available on select weights (Tour 105, Tour 120 and the Wedge shaft) — same shaft, different color. Check the product page for current color availability by weight and flex.
Yes. Grips4Less is an authorized Nippon dealer, so every Modus3 shaft is purchased direct from the manufacturer and ships exactly as Nippon built it.