Tournament Ready DRIVER / FAIRWAY Shafts with Adapter Tip + Grip are here! > Shop now

Steel Shaft Extensions

$7.00 USD

Free Shipping with $99+ US Orders*


Size

Free Shipping with $99+ US Orders*

Orders with US delivery addresses over $99 USD (subtotal) ship for free (excluding shaft orders to Hawaii and Alaska). We also have reasonable flat rate shipping options for order under $99, as well as international deliveries. See our full shipping policy/rates

BTW, our team works fast to ship and get your order delivered as quickly as possible. All in-stock order ship the same day when placed by 5pm ET (2pm PT). For items not in stock, or available as pre-order, please allow ~3-5 business days to process before shipping.

60 Day Easy Returns

Change your mind? No problem. Our hassle-free returns portal lets you request a return and keep track of your refunds. See our return policy here.

100% Authenticity Guaranteed

Grips4less only sells 100% authentic products. We purchase direct from top manufacturers and ship all orders from our warehouse. We've been working with all the top brands in golf for over 3 decades, which means if there are any issues you encounter with your purchase, we are here to resolve them as quickly as possible (so you can get you back on the course!). Your satisfaction is our #1 priority!

Ask Us Anything!

We've been in the golf business for over 3 decades, and we know a lot about golf equipment. If you've got questions, we've got answers (and in the rare case we don't, we will find you someone who does). Send us a text message or e-mail!

Questions & Answers

Have a Question?

Ask a Question
  • Due to the long length of the tapered section, will the swing weight remain unchanged? I need to add 3/4” to a set of irons. Also, do you know the ID of the Ping AWT steel shafts? A few sources said 0.600, but not sure if they are correct.

    You will need to contact Ping about the ID on the steel shafts.

    By increasing the length of the golf shaft by one-half inch, the swingweight will be increased by three swingweight points (increase from D2 to D5, for example). Conversely, by decreasing the length of the golf shaft by one-half inch, the swingweight will be decreased by three swingweight points.  The length will be increased on the butt end (not the tapered tip section).

  • What extension do I need for the armlock putter grip. I’ve got a standard putter. And want to do the armlock grip

    The Armlock putter grip has a 0.580" core size, so you'll want to choose that size for the extension as well: https://www.grips4less.com/products/stainless-steel-extensions-for-steel-shafts?variant=211349933

  • I have True Temper XP 105 shafts wanting to have them extended. What extension size shafts are needed. Thanks

    Some XP shafts have a slightly larger diameter, but in general most will match with the 0.600" size extension.

  • I have bought extensions from you before but this time, I need to extend my TT DG X100 Steel Shafts. What do I get? .580? .600?

    Dynamic Gold shafts have butt end 0.600, so go with the matching extension size.

  • How many inches of the tapered part of the extension is proper? I am extending by about 1.5”. Should the tapered side be trimmed to 1.5” as well? Thank You! By the way, I must say, you guys are machines! Item arrived 2 days earlier than expected! Awesome!👌🏼

    The shaft extension comes as a double length, meaning you'll need to cut it half. Once cut, the taper portion is 3" (the total extension will be 6", meaning you can extend up to 3" in total length for the shaft).

    You do not need to trim the tapered portion, just the outside 3" portion. Let us know if you have any questions! :)

    -Carol

  • What steel shaft extension do I need for a DG Wedge Flex Shaft? .58? .60?

    Most True Temper shafts are 0.600" diameter (to be sure, you could check the specs on their website), and thus you'd need the same measurements for the extension (0.600").

  • can you use steel extenders in composite shafts

    Yes, as long as the fit properly (the butt diameter is matching the tip size). 


WHAT YOU NEED TO KNOW

WHAT YOU NEED TO KNOW

  • Shaft butt extensions for steel shafts
  • Increase the lengths of your clubs
  • Choose from .580" or .600" diameter
  • Comes as a double length (requires cutting in half to produce 2 extensions)

 

SPECIFICATIONS

  • Total Length (after cut in half): 6" (3" tapered portion, goes inside the shaft + 3" outside extension)
  • Diameter: 0.580" or 0.600"

 

FULL DESCRIPTION

Use these shaft butt extensions for steel shafts to extend shafts and increase the length of clubs. The extensions are double length. When cut in two, each section has an end tapered (3") to fit inside the shaft being extended, allowing you to extend up to 3" of the shaft in total length.

 

HOW TO USE

First you'll need to measure the INSIDE diameter (ID) of the butt end of the shaft (not the outside). This will determine the size extension you need. 

Due to slight variations in shaft diameters, you will likely need to apply light sanding to the shaft extension to achieve a suitable fit.

Next, we recommend using high strength shafting epoxy to secure the extension into butt end of the shaft and then cut to length once epoxy is cured. 

 

IMPORTANT NOTE

Improperly installed extenders can cause parts of the club to come loose and fly off. This can cause damage, serious injury, or even death. If you are not sure on how to install extensions properly, please consult a local club-building professional.

Customer Reviews

Based on 34 reviews
94%
(32)
0%
(0)
6%
(2)
0%
(0)
0%
(0)
J
John Kelly
Great Service…top product

Delivery was very prompt…product was great. I love the Golden!!

A
Aaron

Excellent product.

B
Bryan Hathaway

Steel Shaft Extensions

N
NJ John
Iron Shaft Extenders

I needed to increase the length of a 4 iron and a utility wedge by 1/2 inch. Instead of reshafting them, I decided to add the length. Found the correct diameter extenders on Grips4less and within three days, I received the shipment, and was using the clubs at the proper length. Used a standard 1/2 inch pipe cutter to adjust the size and attached the extender with the epoxy I ordered as well. Once cured, I regripped them and was good to go. I had never done this before and it was very easy. A very low cost alternative that works perfectly.

a
alan
2 for 1

Worked well plenty of length to do 2 clubs

Misc

Steel Shaft Extensions

$7.00 USD

WHAT YOU NEED TO KNOW

 

SPECIFICATIONS

 

FULL DESCRIPTION

Use these shaft butt extensions for steel shafts to extend shafts and increase the length of clubs. The extensions are double length. When cut in two, each section has an end tapered (3") to fit inside the shaft being extended, allowing you to extend up to 3" of the shaft in total length.

 

HOW TO USE

First you'll need to measure the INSIDE diameter (ID) of the butt end of the shaft (not the outside). This will determine the size extension you need. 

Due to slight variations in shaft diameters, you will likely need to apply light sanding to the shaft extension to achieve a suitable fit.

Next, we recommend using high strength shafting epoxy to secure the extension into butt end of the shaft and then cut to length once epoxy is cured. 

 

IMPORTANT NOTE

Improperly installed extenders can cause parts of the club to come loose and fly off. This can cause damage, serious injury, or even death. If you are not sure on how to install extensions properly, please consult a local club-building professional.

Size

  • Butt Size .580
  • Butt Size .600
View product