Re-gripping Instructions for Never Bend Grips
Never Bend putter grips can be installed in the same way as normal golf grips. Please watch the general re-gripping instructions video below, and note the following:
2 IMPORTANT POINTS:
1) From our experience, we recommend using a generous amount of solvent or mineral spirits to prevent the grip getting stuck midway.
2) When installing Never Bend grips, be sure not to force the grip after it reaches the end of the shaft. Leave a little wiggle room. The best way to install the grip is to measure the inside of the grip with a rod and mark the shaft where the end of the grip will be.
Including required tools & supplies.