IMPORTANT: Make sure to also read the important instructions below the video.
IMPORTANT: All JumboMax Grips require care when installing. Make sure to note these 4 points:
#1) All JUMBOMAX Grips can only be installed with tape & solvent. You cannot use an air compressor to install them, as they will likely be damaged.
#2) If using pre-cut tape strips, remember to remove the wax paper from BOTH sides of the tape
#3) Use plenty of solvent to lubricate the grip and shaft
#4) Slide the grip on straight. If the grips are bent during installation, they may become damaged.
If you have any questions, please contact us here
LEARN MORE:
EVERYTHING YOU NEED TO KNOW for RE-GRIPPING YOUR CLUBS
Including required tools & supplies.
Including required tools & supplies.