Tournament Ready DRIVER / FAIRWAY Shafts with Adapter Tip + Grip are here! > Shop now

Tacki-Mac Bubble Replacement Grip (.810" core)

$5.25 USD

Free Shipping with $99+ US Orders*


Option

Free Shipping with $99+ US Orders*

Orders with US delivery addresses over $99 USD (subtotal) ship for free (excluding shaft orders to Hawaii and Alaska). We also have reasonable flat rate shipping options for order under $99, as well as international deliveries. See our full shipping policy/rates

BTW, our team works fast to ship and get your order delivered as quickly as possible. All in-stock order ship the same day when placed by 5pm ET (2pm PT). For items not in stock, or available as pre-order, please allow ~3-5 business days to process before shipping.

60 Day Easy Returns

Change your mind? No problem. Our hassle-free returns portal lets you request a return and keep track of your refunds. See our return policy here.

100% Authenticity Guaranteed

Grips4less only sells 100% authentic products. We purchase direct from top manufacturers and ship all orders from our warehouse. We've been working with all the top brands in golf for over 3 decades, which means if there are any issues you encounter with your purchase, we are here to resolve them as quickly as possible (so you can get you back on the course!). Your satisfaction is our #1 priority!

Ask Us Anything!

We've been in the golf business for over 3 decades, and we know a lot about golf equipment. If you've got questions, we've got answers (and in the rare case we don't, we will find you someone who does). Send us a text message or e-mail!

Questions & Answers

Have a Question?

Ask a Question
  • LOOKING FOR GRIPS FOR MY PRINCE CLUBS WITH TAPER SHAFTS?

    Can you measure the outside diameter of the shaft (without grip)? You'll then want to match that to the closest grip size available (for example, this Tacki-Mac Bubble has a core size of 0.810"). 

  • I understand the butt end is size .810, what size is the other end… .600?

    The core side (inside diameter is 0.810"), and is roughly parallel. The outside diameter is around 0.900".

  • Will the 810 grip fit ladies taylor made L-60 plus bubble shaft?

    Most TaylorMade bubble shafts do fit the .810" core grip. However to confirm, please remove your existing grip and verify the outer diameter of the shaft (butt end) to make sure.

  • how do I know if I need the 810 or the 865 for my burner shaft driver? Additionally, why do I need the tool to put the grip on?

    The best thing to do would be to remove the old grip and measure the outer diameter of the shaft at the butt end. This will be the core size of the grip you'll need.

    The reason bubble grips usually require a special installer tool is because they are very thin and stretchy. They don't have much rigidness to them, so they are difficult to push/slide onto a shaft, like how a normal grip would be installed.

    Please read: What you need to know about bubble grips

  • Will these fit an older taylormade 7 wood

    Bubble grips will only fit bubble shafts, which a 0.810" butt diameter.

  • Will that taki mac bubble grips work on Goodwin shafts/clubs

    You'll want to measure the butt diameter of the shaft and then match to the closet core size of a grip. Sorry, we do not have information on Goodwin shafts/club, but maybe you can reach out to the manufacturer to get this information.

  • Will this grip fit the Taylormade Burner L 60 shaft?

    Yes, The TaylorMade Burner shafts will fit the .810" Tacki-Mac bubble grip.

  • Can you get the 810 core in an oversize grip?

    It only comes in a standard size grip.

  • Will these fit my 20 year old Taylor Made burner Ladies clubs with the Bubble shaft?

    Yes, as long as the shaft has the same outer diameter (0.810"), then they will fit.

  • Will buble shaft grip work on my Masterfit driver

    It depends - if the shaft outer diameter is about the same as the core size of the grip (0.810), then yes it would fit.

  • Hello. Will this fit a Taylor Made Burner Firesole iron?

    Yes, the Tacki-Mac Bubble 0.810 grip will fit the TaylorMade Burner Firesole shaft, since it has the matching shaft OD.

  • Will these fit Prince irons?

    Can you measure the outer diameter of the butt end of the shaft? If it's 0.810" (or pretty close), it should fit. Please note, you'll need an installer tool for installation.

  • Will these fit the Tommy Armour TI-100 clubs? Thanks.

    You'll want to check the outer diameter of the butt end of the shaft. If it's equal or close to 0.810, then it will work. Fyi - here are some additional bubble grips, in case the measurements are different: https://www.grips4less.com/collections/bubble-golf-grips

  • Can I build up the shaft to mid-size

    Technically with bubble shafts/grips, you are already past midsize in terms of the outer diameter of the grip. You can try adding a few layers of tape, but it's not easy to install bubble grips in general, so there may be some issues getting the grips with added tape. If you'd like to try, we highly recommend this tool for installing bubble grips - https://www.grips4less.com/products/ultimate-grip-installer-tool

    Let us know if you have any questions here.


WHAT YOU NEED TO KNOW

IMPORTANT

- This is a STANDARD size grip, that fits a bubble shaft that has an outer diameter of 0.810" or smaller. This is NOT an oversize grip.

- To install a bubble grip onto a bubble shaft, you will need the Ultimate Grip Installer Tool

- Please also note that the outer diameter and size of a bubble grip is almost IDENTICAL to a standard size grip. The only difference is bubble grips are thinner,  softer, and much stretchier. They will stretch accordingly once installed with the Ultimate Grip Installer Tool.

- Make sure to measure the butt end of your shaft to confirm which bubble shaft you need. The Tacki-Mac Bubble Replacement Grip only fits bubble shafts with a butt diameter of .810". See all bubble grips here.

 

WHAT YOU NEED TO KNOW

  • Read this first: Everything you need to know about bubble grips
  • Made to fit Taylormade bubble shafts or shafts with .810" butt diameter
  • Standard size outer diameter
  • Perforated wrap style
  • High water resistance
  • Made in the USA
  • Available Colors: Black

SPECIFICATIONS

Material Thermo plastic rubber
Core size .810 Round
Weight 32g
Grip Size Standard

 

HOW-TO REGRIP YOUR CLUBS

 Step-by-step guide with video instructions

 

NEED TAPE & SOLVENT?

Make sure to add our best-selling grip kit to your cart:

Basic Grip Installation Kit (14x tape strips + solvent)

Customer Reviews

Based on 144 reviews
87%
(125)
7%
(10)
1%
(1)
1%
(2)
4%
(6)
M
Michael Whitlock
Beware False Advertising for Bubble Shaft Grips

Advertised as Tacki-Mac Bubble Grip Replacement (.810) but in fact is a standard size grip. They followed after the grip was shipped stating this grip was standard size and tried to sell me a $20 install tool for bubble shafts and told me there is no to install a standard grip on the bubble shaft without the tool. I ended up tossing the Tack-mac grip and DID NOT buy the install tool and installed a grip I originally bought using some needle nose piers to slide on the bubble shaft. I sent an email to Grips4less asking about returning the grip I bought from them and never heard back. Will not deal with them again.

Hi Michael,

We are sorry to hear there is an issue. As is stated on this product page, bubble grips are standard size grips. They are designed to fit on a bubble shaft with outer diameter of 0.810' or less. The only difference is bubble grips are thinner, softer, and much stretchier. They will stretch accordingly once installed with the Ultimate Grip Installer Tool.

Let us know if you have any questions or need assistance.

B
Brian DeAngelis
Wrong grip for a tailor-made bubble 3W

Did some research and didn’t realize the larger grip for that talyormade is really at the head of the grip, the very top, not to get over the shaft to put on. Long story short, it did not fit.

J
Jim

Returned not needed

P
Patsy Vaughn
Bubble shaft grips

Grips are great.
Must have tool to install grips.
Don’t insert the tool any farther than an inch and a half into the grip.
Very happy with purchase!!

L
Larry McElwee
Hood

I already received the grips thx

Tacki-Mac Bubble Replacement Golf Grip (.810")
Tacki-Mac

Tacki-Mac Bubble Replacement Grip (.810" core)

From $5.25 USD

IMPORTANT

- This is a STANDARD size grip, that fits a bubble shaft that has an outer diameter of 0.810" or smaller. This is NOT an oversize grip.

- To install a bubble grip onto a bubble shaft, you will need the Ultimate Grip Installer Tool

- Please also note that the outer diameter and size of a bubble grip is almost IDENTICAL to a standard size grip. The only difference is bubble grips are thinner,  softer, and much stretchier. They will stretch accordingly once installed with the Ultimate Grip Installer Tool.

- Make sure to measure the butt end of your shaft to confirm which bubble shaft you need. The Tacki-Mac Bubble Replacement Grip only fits bubble shafts with a butt diameter of .810". See all bubble grips here.

 

WHAT YOU NEED TO KNOW

SPECIFICATIONS

Material Thermo plastic rubber
Core size .810 Round
Weight 32g
Grip Size Standard

 

HOW-TO REGRIP YOUR CLUBS

 Step-by-step guide with video instructions

 

NEED TAPE & SOLVENT?

Make sure to add our best-selling grip kit to your cart:

Basic Grip Installation Kit (14x tape strips + solvent)

Option

  • Grip only
  • Grip + Installer Tool
  • (13) Grips + (1) Installer Tool
  • (13) Grips + (1) Installer Tool + (14) Tape Strips + (4oz) Solvent
View product