Under $150

01ASSEMBLY: ALIGN SHAFT FLO PLANE POSITION TO NEUTRAL or SPECIFIED ADAPTER POSITION

04_Step 4) - 1 Wrap of Tape (DEFAULT) +$0

04_Step 4) - 1 Wrap of Tape Full Length + 2 Wraps Tape Bottom Half +$7

04_Step 4) - 1 Wrap of Tape Full Length + 3 Wrap Tape Bottom Half +$9

04_Step 4) - 2 Wraps of Tape +$3

04_Step 4) - 3 Wraps of Tape +$5

04_Step 4) 1 Wrap of Tape Full Length + 1 Wrap Tape Bottom Half +$5

05_Step 5) INSTALL GRIP (w/ GRIP LOGO ***OPPOSITE DIRECTION*** AS Neutral SETTING)

Assembled Grip Charge for (1) Grip

Assembled Shaft Charge for (1) Shaft Trimming

ASSEMBLY ADD-ON: TAPE INSTALLATION (1 Layer Tape Full Length + 1 Layer Tape Bottom Half)

ASSEMBLY ADD-ON: TAPE INSTALLATION (1 Layer Tape Full Length + 2 Layers Tape Bottom Half)

ASSEMBLY ADD-ON: TAPE INSTALLATION (1 Layer Tape Full Length + 3 Layers Tape Bottom Half)

ASSEMBLY ADD-ON: TAPE INSTALLATION (2 Layers of Tape)

ASSEMBLY ADD-ON: TAPE INSTALLATION (3 Layers of Tape)

ASSEMBLY TEST INSTRUCTIONS

IRON SHAFT ADD-ON: DETERMINE AND MARK SHAFT FLO PLANE POSITION

Taper Tip Conversion (for UST Recoil Shafts)